FBT MITUS 206LA
Active line array - 2x6,5" + 1,4" - 600Wrms+300Wrms
Artnr. 703722
The FBT MITUS 206LA is an active two-way compact line line array system featuring 2 x 6.5” B&C neodymium woofers with 1.7” voice coil and 1.4” exit B&C neodymium driver with 2.5” voice coil. All in a Polypropylene gas-injected enclosure. 500W + 150W – 129dB SPL LF / 133dB SPL HF
- Compact 2-way, bi-amplified bass-reflex design
- 2 x 6.5’’ (165 mm) B&C neodymium woofers with 1.7’’ (44 mm) coil
- 1.4’’ (36 mm) exit B&C neodymium driver with 2.5’’ (64 mm) coil
- Frequency response from 68Hz to 20KHz
- Latest class D built-in amplifiers, 600Wrms to the LF and 300Wrms to the HF with switch mode power supply
- DSP on-board with 8 presets, +/- 5db HF level control for accurate amplitude shading
- Control panel with XLR input and link, volume, presets, HF level, HP-filter, ground-lift
- 100° horizontal waveguide with very low distortion and near flat wavefront up to 18Khz
- High impact polypropylene gas-injected enclosure with integrated rigging hardware adjustable with 0° to 10° angle between cabinets at 2° step
- Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet full sized line array, the MITUS 206LA maybe used also in outdoor applications where the system is not directly exposed to the elements
- Wide range of hardware accessories for flying and ground stacked configurations
- Very lightweight, only 14Kg
INPUT CONNECTOR:
XLR con loop
POWER CORD:
5 mm/inch
DIMENSION (WXHXD):
574 x 220 x 383 mm
WEIGHT:
14 kg
MAXIMUM SPL CONT/PEAK:
125/134 dB
DISPERSION:
100°x10° max dipendente dal n° degli elementi H x V
INPUT IMPEDANCE:
22 Kohm
CROSSOVER FREQUENCY:
1.2 KHz
AC POWER REQUIREMENTS:
640 VA
BUILT-IN AMPLIFIER PEAK LF/HF:
1200/600 W
FREQUENCY RESPONSE:
68Hz - 20KHz -6dB
LOW FREQUENCY WOOFER:
2 x 165 bobina 44 neodimio inch
HIGH FREQUENCY DRIVER:
1 x 36 bobina 64 neodimio inch
BUILT-IN AMPLIFIER LF/HF:
600/300 W RMS
